Message-ID: <001a01c44048$61d15bf0$2402a8c0@EDWARD>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-84825@logan.com>
Subject: Re: [FlyRotary] Re: New cooling Ducts
Date: Sat, 22 May 2004 18:01:49 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Thanks, Mike

I check it out.  However, it just dawned on me that I have a MicroChip
development board sitting beside my desk blinking with a simple program I
wrote trying to learn how to program one of these things.  It also has a A/D
conversion module and EVEN a temperature sensor to play with.

  So looks like if I wired temp sensors into the A/D converter channels of
this chip and read them out through a Rs 232 link to a lap top, I would have
my data collector - IF.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- 
From: "Mike Robert" <pmrobert@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, May 22, 2004 5:28 PM
Subject: [FlyRotary] Re: New cooling Ducts


> Ed Anderson wrote:
>
> > Good point, Finn
> >
> >    I would just as soon not deal with non-linear output.  I'll check
> > them out.  By the way, what do you use to collect your data? Laptop
> > with a program? an A/D converter? both?
> >
> > Ed
> >
>
> Ed, look at these devices. Very simple to get linear output from our
> beloved nonlinear TCs.
>
> http://www.analog.com/UploadedFiles/Data_Sheets/421725987AD594_5_c.pdf
>
>     -Mike
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>