|
Message
Rusty, I checked to day to see where I put the oil
temperature sensor, and it is in the stock location right next to the oil
pressure sender and just below the stock location of the oil filter.
Steve, Todd's right. If you're
using the sensor location that I circled in the attached pic, that's
water.
BTW - I can't believe that you took off the turbo. What a kick that
thing gives to the rotary.
I should be able to get 200 HP out of
my engine at 7K+ rpm, which is much healthier than running boost. If that
all works out, I think it will move an RV-3 along well enough. I certainly
don't miss the extreme nose heavy condition, nor the cooked items under the
cowl. I certainly won't say that I'll never go back to boost, but
it just might be a little different next time :-)
Rusty (intake shaping done, boring
secondary injector holes)
|