Return-Path: Received: from [199.185.220.240] (HELO priv-edtnes46.telusplanet.net) by logan.com (CommuniGate Pro SMTP 4.2b3) with ESMTP id 83735 for flyrotary@lancaironline.net; Sat, 22 May 2004 02:31:25 -0400 Received: from Endurance ([207.216.174.11]) by priv-edtnes46.telusplanet.net (InterMail vM.6.00.05.02 201-2115-109-103-20031105) with SMTP id <20040522063125.PFHR15403.priv-edtnes46.telusplanet.net@Endurance> for ; Sat, 22 May 2004 00:31:25 -0600 From: "Haywire" To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] more EGT pics Date: Fri, 21 May 2004 23:31:22 -0700 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_009B_01C43F8B.B9F8A260" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 In-Reply-To: Importance: Normal This is a multi-part message in MIME format. ------=_NextPart_000_009B_01C43F8B.B9F8A260 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I forgot to add this warning. Trying to drill directly through the cast steel is hopeless. My best drill bits with Boelube couldn't penetrate. You need to use a die grinder to break through the surface which has been extremely hardened by repeated heat/cool cycles. It doesn't take much, then you will be able to drill much easier. I decided to grind out a level area to allow me to drill square, while clamped in a drill vice. Ps. In the pic EGT1 it looks like allot of material was removed, but this is misleading. It didn't take much out to get it level and square. S. Todd Bartrim Turbo 13B RV-9Endurance C-FSTB http://www3.telus.net/haywire/RV-9/C-FSTB.htm "Whatever you vividly imagine, Ardently desire, Sincerely believe in, Enthusiastically act upon, Must inevitably come to pass". -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On Behalf Of Haywire Sent: Friday, May 21, 2004 11:22 PM To: Rotary motors in aircraft Subject: [FlyRotary] more EGT pics A few more pics showing how I installed the T/C's for any other brave souls that might want to try it. S. Todd Bartrim Turbo 13B RV-9Endurance C-FSTB http://www3.telus.net/haywire/RV-9/C-FSTB.htm "Whatever you vividly imagine, Ardently desire, Sincerely believe in, Enthusiastically act upon, Must inevitably come to pass". ------=_NextPart_000_009B_01C43F8B.B9F8A260 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

I=20 forgot to add this warning. Trying to drill directly through the cast = steel is=20 hopeless. My best drill bits with Boelube couldn't penetrate. You need = to use a=20 die grinder to break through the surface which has been extremely = hardened by=20 repeated heat/cool cycles. It doesn't take much, then you will be able = to drill=20 much easier. I decided to grind out a level area to allow me to drill = square,=20 while clamped in a drill vice.

Ps. In=20 the pic EGT1 it looks like allot of material was removed, but this is=20 misleading. It didn't take much out to get it level and=20 square.

S. Todd Bartrim
Turbo 13B = RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

= =20 "Whatever you vividly imagine, Ardently desire, Sincerely believe in,=20 Enthusiastically act upon, Must inevitably come to pass".

-----Original Message-----
From: Rotary motors in = aircraft=20 [mailto:flyrotary@lancaironline.net]On Behalf Of=20 Haywire
Sent: Friday, May 21, 2004 11:22 = PM
To: Rotary=20 motors in aircraft
Subject: [FlyRotary] more EGT=20 pics

A = few more pics=20 showing how I installed the T/C's for any other brave souls that might = want to=20 try it.

S. Todd Bartrim
Turbo 13B = RV-9Endurance
C-FSTB
http://www3.telus.net/haywire/RV-9/C-FSTB.htm

= =20 "Whatever you vividly imagine, Ardently desire, Sincerely believe in,=20 Enthusiastically act upon, Must inevitably come to pass".

------=_NextPart_000_009B_01C43F8B.B9F8A260--