|
Message
John, I adjusted my
dipstick by cutting down the dipstic tube by the same length as the thickness of
the engine mount plate. In my case 1/2”.
Buly
I'm assuming you
have a plate, sandwiched between the oil pan and engine. If so,
did you extend the oil pickup a half inch to make up for the plate?
In my case, I used the stock pickup, and figure that I'll just have a half inch
of oil that I can't pick up. Since the pickup wasn't changed, the oil
dipstick calibration is still correct.
Just
curious.
Rusty (got a
great deal on a big white Chevy
truck)
|