|
|
Thanks Charlie for Finn’s address.
Previously Ive used mplabs and a PICkit 3 to write updated code to an EC2.
By updated code, I mean changing configuration settings in the code such as:
RX8COIL EQU 0x00 ;1= 2.6MS DWELL TIME (RX-8 COIL)
RX7COIL EQU 0x00 ;1= 3.5MS DWELL TIME USED (also used for A7 2007 option) LS1COIL EQU 0x00 ;1= 4.3 MS DWELL USED
HONDACOIL EQU 0x00 ;1= 1.7 MS DWELL (A REALLY TINY COIL)
LS2COIL EQU 0x01 ;1= 4.0 MS DWELL
TURBO EQU 0x00 ;0 = NA, 1 = TURBO VERSION (BIT 0 SET IN ECINFO IF TRUE)
BFACTOR EQU D'25' ;BOOST RETARD FOR IGNITION TIMING lower value = more boost retard (25 IS USED FOR MOST ROTARY 20 on 03-05-09,
LGSEC EQU 0x01 ;0 = PRI & SEC INJECTORS SAME SIZE 1 = LARGER SECONDARY INJECTORS (RENESIS 4 port)
WIDEBAND EQU 0x01 ;0 = NARROWBAND O2 SENSOR IN USE, 1 = WIDEBAND SENSOR IN USE.
TEMPSENSO EQU 0x00 ;0 = THERMISTOR, 1 = LM34
MAPSENSOR EQU 0x00 ;0 = MPX4250 SENSOR, 1 = MPX4115 (EARLIER VERSION OF EC2 ONLY)
BUSENSOR EQU 0x01 ;0 = NO BACKUP SENSOR, 1 = BACKUP INSTALLED (0xA9,AB,AD,B1,B2,B4 0-200 ENGINE ONLY)
I’m now using an EC3 and was chasing the latest version of the code.
I might put a turbo on it in the future so will want to update the TURBO EQU
Cheers
Steve Izett
Perth Western Australia
On 11 Jun 2019, at 9:18 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Hi Sam,
I actually haven't figured that out yet.
It's been decades since I did assembler programming. So I need to get a development system together for it.
The source code can be read using any text editor.
I think there is a free development studio downloadable from Microchip Technology for the 18F452 chip.
Maybe something like this:
https://sourceforge.net/projects/picsim/
I also need to get a (flash) programmer interface (hardware) for it.
I'll keep the list updated as I find out more. Others, please do the same.
Finn
On 6/10/2019 11:05 AM, Sam Hoskins sam.hoskins@gmail.com wrote:
What do you need for an interface for reading and writing???
On Fri, Jun 7, 2019, 11:47 AM Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
If no reply from Tracy, I do have a copy.
However, be warned that you'll probably have to read and understand all of the code before making any changes.
He's currently playing with the SpeedUnio software and board and is very impressed with it, especially working together with TunerStudio. The software is open source and TunerStudio Pro has auto tuning enabled.
Finn
On 6/7/2019 10:37 AM, Stephen Izett stephen.izett@gmail.com wrote:
> Hi there Tracy
>
> I seem to have lost your PM.
>
> Have you released the EC3 code. Could I have a copy please as I may need to reprogram for turbo.
>
> Thanks
>
> Steve Izett
>
>
> --
> Homepage:?? http://www.flyrotary.com/
> Archive and UnSub:?? ??http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
--
Homepage:?? http://www.flyrotary.com/
Archive and UnSub:?? ??http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|