On 1 Aug 2018, at 8:22 pm, Charlie England ceengland7@gmail.com <flyrotary@lancaironline.net> wrote:

10mm= ~0.394 inches
AN-8=     0.50  Inches

Do you have really long runs of oil lines?

On Wed, Aug 1, 2018 at 1:30 AM, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
Hi guys
I measured the oil passage diameters (bearing and regulator passages) under the oil filter pedestal of a Renesis today.
They are 10mm in case anyone else was wondering.
I don’t know what possessed me all those years ago, but I plumbed the oil system in AN-8.
I contest Neil’s claim of being the greatest idiot.
In the process of rebuilding it with a AN-10 plumbing and using a Mocal 44 row cooler.

Still close to finished!

Cheers

Steve Izett
Glasair Super IIRG Renesis 4 port RD-1C EC3 EM3  > On 31 Jul 2018, at 7:47 pm, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
> > Hi guys
> Does anyone know off hand or have a rear housing handy to measure the oil passage diameters (bearing and regulator passages) under the oil filter pedestal of a Renesis?
> Much appreciated.
> > Steve Izett
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html