From: "John Overman" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=98.139.212.175; envelope-from=mooneydryver@yahoo.com
Date: Wed, 3 Aug 2016 14:42:51 +0000 (UTC)
Reply-To: John Overman <mooneydryver@yahoo.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-ID: <1096728994.10776941.1470235371349.JavaMail.yahoo@mail.yahoo.com>
Subject: Re: [FlyRotary] Re: Coils
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
References: <1096728994.10776941.1470235371349.JavaMail.yahoo.ref@mail.yahoo.com>
Content-Length: 2675

Wounderful. Either send me your address, and I'll send the EC-2 at the end =
of Oct. or I'll just contact you in Oct. All I have is your Florida address=
.

thanks John (mooneydryver@yahoo.com)
--------------------------------------------
On Tue, 8/2/16, Tracy Crook <flyrotary@lancaironline.net> wrote:

 Subject: [FlyRotary] Re: Coils
 To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
 Date: Tuesday, August 2, 2016, 9:33 PM
=20
 Sorry, thought I put this in last
 time.=C2=A0 I'd be happy to do an update but I'm away from
 home until mid October=C2=A0 so can't do it until
 then.=C2=A0 Standard charge for software update and test is
 $65.00 + $15 shipping.
=20
 All the best,
 Tracy
=20
 Sent from my iPad
=20
 > On Aug 2, 2016, at 09:36, John Overman <flyrotary@lancaironline.net>
 wrote:
 >=20
 > Thanks for the reply. Since you are the world's only
 guru in EC-2 metology. Is there any way I could induce you
 to perform the needed surgery?
 >=20
 > John
 > --------------------------------------------
 > On Sun, 7/31/16, Tracy Crook <flyrotary@lancaironline.net>
 wrote:
 >=20
 > Subject: [FlyRotary] Re: Coils
 > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
 > Date: Sunday, July 31, 2016, 7:29 PM
 >=20
 > Hi John,
 >=C2=A0 =C2=A0 The EC2 must be reprogrammed for GM
 > coils.=C2=A0 The dwell time is different and the
 leading
 > coil is waste spark system on Mazda coils but not on
 GM
 > coils.=C2=A0=20
 >=20
 > Glad you're back on the project!
 >=20
 > Tracy Crook
 >=20
 > Sent from my iPad
 >=20
 >>> On Jul 30, 2016, at 20:52, John Overman <flyrotary@lancaironline.net>
 >> wrote:
 >>=20
 >> A question for Tracy. While you are fielding
 questions,
 > I recently started working on my plane again after a
 long
 > hiatus. Originally I was going to use mazda coils on my
 13b
 > and I believe you set my EC2 up for them. I know I
 bought
 > some resistors for them. But I have decided to use
 > individual coils like the GM coils. Is it okay to
 switch
 > with the EC2 as it is?
 >>=20
 >> John Overman
 >>=20
 >> --
 >> Homepage:=C2=A0 http://www.flyrotary.com/
 >> Archive and UnSub:=C2=A0=C2=A0=C2=A0http://mail.lancaironline.net:81/li=
sts/flyrotary/List.html
 >=20
 > --
 > Homepage:=C2=A0 http://www.flyrotary.com/
 > Archive and UnSub:=C2=A0=C2=A0=C2=A0http://mail.lancaironline.net:81/lis=
ts/flyrotary/List.html
 >=20
 > --
 > Homepage:=C2=A0 http://www.flyrotary.com/
 > Archive and UnSub:=C2=A0=C2=A0=C2=A0http://mail.lancaironline.net:81/lis=
ts/flyrotary/List.html
=20
 --
 Homepage:=C2=A0 http://www.flyrotary.com/
 Archive and UnSub:=C2=A0=C2=A0=C2=A0http://mail.lancaironline.net:81/lists=
/flyrotary/List.html