Mailing List flyrotary@lancaironline.net Message #62568
From: Charlie England <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Renesis crank angle sensor wiring?
Date: Mon, 20 Jun 2016 15:48:32 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Excellent! Thanks, Bobby; your pin cross reference was where I got the 'A' reference, but I didn't have the EC3 drawing.

Onward, through the fog.....

Charlie

On Mon, Jun 20, 2016 at 3:39 PM, Bobby J. Hughes <flyrotary@lancaironline.net> wrote:

Charlie,

 

 

From my EC3 manual. CAS Pin A is shown away from the CAS mounting tab. CAS Pin B is shown closest to the mounting tab.  

 

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Monday, June 20, 2016 3:35 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Renesis crank angle sensor wiring?

 

Anyone remember which pin (2 pin Renesis CAS) goes to which EC2 terminal (pins 22 & 23)? I found one note that mentions the 'A' terminal, but my CAS has no marks, & I don't have the connector from the car. 

 

Thanks,

 

Charlie


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster