From: "GEORGE PUTNAM" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=17.164.88.11; envelope-from=georgeputnam@me.com
Content-type: text/plain; charset=utf-8
MIME-version: 1.0 (Mac OS X Mail 9.3 \(3124\))
Subject: Re: [FlyRotary] Re: Mistral
In-reply-to: <list-8730558@logan.com>
Date: Tue, 14 Jun 2016 11:26:43 -0800
Content-transfer-encoding: quoted-printable
Message-id: <BCB43756-E110-4ED3-9A00-D0B86544CB7E@me.com>
References: <list-8730558@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>

Glad to hear the discussion. Since I bought Ernest=E2=80=99s project I =
realize that he used the most up to date technology at the time of his =
build=E2=80=A6=E2=80=A6=E2=80=A6..but things may have changed =
significantly in the last 10 or 12 years so I am planning on the new =
engine from square 1=E2=80=A6=E2=80=A6=E2=80=A6=E2=80=A6..the older 13B =
will be fun in my boat!
George
> On Jun 14, 2016, at 11:17 AM, Tracy <flyrotary@lancaironline.net> =
wrote:
>=20
> Right Charlie,  those were the short runners used for the SUN 100 =
race.  You could feel the engine come 'on the pipe' around 7400 Rpm =
which is where I ran it for the race.   All other times I use the longer =
pipes with a lower peak HP rpm. =20
>=20
> Tracy
>=20
> Sent from my iPad
>=20
>> On Jun 14, 2016, at 10:26, Charlie England =
<flyrotary@lancaironline.net> wrote:
>>=20
>>> On 6/14/2016 9:52 AM, Tom Mann wrote:
>>> Any Idea as to where one might find this information?
>>>=20
>>> -----Original Message----- From: Charlie England
>>> Sent: Tuesday, June 14, 2016 9:43 AM
>>> To: Rotary motors in aircraft
>>> Subject: [FlyRotary] Re: Mistral
>>>=20
>>> It's not that hard to make an intake that will make great power. =
Look at
>>> Tracy's setup. Might not be aesthetically beautiful to some eyes, =
but to
>>> me, function is beauty. I don't know of any N/A 2 rotor that's as =
fast
>>> as his -4, or as efficient at lower speeds. And really simple to =
make.
>>>=20
>>> Charlie
>>=20
>> Hope Tracy doesn't mind; here's a shot of the Renesis manifold. I =
believe that the tubes inside the 'box' were later extended to be near =
the opposite wall. IIRC, Tracy said that the tubes are ~11" from the =
face of the block to the end of the bellmouth.
>>=20
>> You can see old versions of the RWS website by using the Wayback =
Machine & picking a date.
>>=20
>> Charlie
>> <Shoebox_1_08_08_2004.jpg>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html