|
|
Right Charlie, those were the short runners used for the SUN 100 race. You could feel the engine come 'on the pipe' around 7400 Rpm which is where I ran it for the race. All other times I use the longer pipes with a lower peak HP rpm. Tracy
Sent from my iPad
On Jun 14, 2016, at 10:26, Charlie England <flyrotary@lancaironline.net> wrote:
On 6/14/2016 9:52 AM, Tom Mann wrote:
Any Idea as to where one might find this information?
-----Original Message----- From: Charlie England
Sent: Tuesday, June 14, 2016 9:43 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Mistral
It's not that hard to make an intake that will make great power. Look at
Tracy's setup. Might not be aesthetically beautiful to some eyes, but to
me, function is beauty. I don't know of any N/A 2 rotor that's as fast
as his -4, or as efficient at lower speeds. And really simple to make.
Charlie
Hope Tracy doesn't mind; here's a shot of the Renesis manifold. I believe that the tubes inside the 'box' were later extended to be near the opposite wall. IIRC, Tracy said that the tubes are ~11" from the face of the block to the end of the bellmouth.
You can see old versions of the RWS website by using the Wayback Machine & picking a date.
Charlie
<Shoebox_1_08_08_2004.jpg>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|