It might be an optical illusion but it seems like the drain tube has been flattened at the bend-- if so, not a good thing as it will possibly cause a restriction to drainage.

 

Use post-cooler oil to feed the PRSU (IMHO) The PRSU will create it's own heat, why add injury to insult.

 

Please understand mine hasn't run yet. I take the PRSU feed from an adaptor at the old oil filter tower.  I use a remote filter. The cooled oil goes through the pump to the adaptor which separates it to the PRSU and engine galleries. I also measure the oil pressure from that spot.

 

Rich

 

Here's the drain.  I seem to recall that this is where Tracy told me to put it a couple years ago.

Still working on the supply.    Has anybody used post-cooler oil to feed the PSRU?  Is that ill advised?  Seems fairly straight forward to do it that way and would eliminate a bunch of 1/4 line. 







Sent from my iPad

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html