On Thu, Aug 15, 2013 at 7:17 AM, <jskmberki@windstream.net>
wrote:
Hi,
I am trying to put together an engine monitor to measure oil temp, oil
pressure, water temp, water pressure, fuel pressure, EGTs, tach,air pressure
(for delta P across the rad). I am using an EC4 to get the P Port running
and will switch to something else (EC-3) for flight. Sending units need
to be as close to working values as possible. The GM temp sensor looks
like it will work for water and oil and i got a program working using an
arduino board USBed to my PC. The VDO 360-009 0-80PSI looks like it would
work for oil pressure and the VDO 360-043 Looks like it would work for water
pressure. 0-30psi. What is every one using for fuel pressure? I
believe the target is 38 psi for the pumps that John used. I found an app
for apple devices that displays data and gets it via wifi. There is a
wifi sheild for the arduino so it looks doable. Thought it would work
while I dial in the P
Port. Can the
engine monito and ECU share sensor inputs? Does there need to be
signal conditioning? Appreciate any help / input.
Joe Berki
Limo EZ
P Port
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html