Received-SPF: none
 receiver=logan.com; client-ip=207.115.11.54; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-6414115@logan.com>
In-Reply-To: <list-6414115@logan.com>
Subject: RE: [FlyRotary] Re: Tear down
Date: Mon, 12 Aug 2013 11:20:29 -0400
Message-ID: <CFC148680D1147FCB11AF90666DC32E8@Desktop>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: Ac6XYrPVS2x4eqlFT+CSbSguWNbZqgADIiKA

If you have the same kind of memory that I have, you should do the rebuild
then pickle it till you are ready to install.

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Ernest Christley
Sent: Monday, August 12, 2013 9:47 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Tear down

On 08/11/2013 08:42 PM, Mark McClure wrote:
> So after much difficulty to get the pulley bolt off, I have finally torn
apart the engine.
>
> Some looks usable some doesn't. Next step will be to take it the
AutoSkills shop to use the parts washer and really get everything clean.
>
> I plan to store the parts for a bit. Plan was to coat everything with oil,
wrap them in oil soaked rags, and cover with Saran Wrap. Then put the parts
in Rubbermaid bins.
>
> Thoughts? Is there a specific oil I should use? Or am I better to finish
the overhaul and store it as a complete block?
>
> Mark
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
Boiled linseed oil.  It reacts with oxygen.  It does stink, though.

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html