Received-SPF: pass
 receiver=logan.com; client-ip=209.85.161.171; envelope-from=rwstracy@gmail.com
Subject: Re: [FlyRotary] Re: RX-8 trigger wheel sensor location
References: <list-6181658@logan.com>
From: Tracy <rwstracy@gmail.com>
Content-Type: text/plain;
	charset=us-ascii
In-Reply-To: <list-6181658@logan.com>
Message-Id: <3D78E706-CA85-4C8F-A9C5-CBF02CDFE37B@gmail.com>
Date: Fri, 5 Apr 2013 08:44:14 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (1.0)

Mine is about 5:00 but the physical location is not important as long as the=
 relative position of the sensor, wheel & crankshaft are correct.  When roto=
r 1 is at TDC, the sensor should be lined up with the 5th tooth after the si=
ngle 30 degree gap. =20

Tracy=20

Sent from my iPad

On Apr 4, 2013, at 11:43 PM, "Bill Bradburry" <bbradburry@bellsouth.net> wro=
te:

> Joe,
> Just guessing I would say it is around 2:00 pm. If you are standing in fro=
nt
> of the car.
> Bill B
>=20
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of jskmberki@windstream.net
> Sent: Thursday, April 04, 2013 8:38 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] RX-8 trigger wheel sensor location
>=20
> I would like to use a RX-8 trigger wheel and sensor on my 2nd gen P Port.
> Does anyone know where the sensor is mounted on the Renisis engin with
> respect to the Eshaft, looking at the front of the engine the 12:00 o' clo=
ck
> postion or zero degrees is the sensor mounted at 135 degrees?  Thanks for
> any input.
>=20
> Joe Berki
>=20
>=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List=
.html