Ok, here is new information to me. I posted on the
Velocity list regarding my oil temps and was informed that oil
temperature should be measured coming OUT of the coolers, not
out of the engine like I have set up.
This is just the opposite from the way the factory has the
coolant plumbing run as the stock coolant temperature sensor
is near the thermostat housing as it comes out of the engine
and into the radiator. I do not know where the stock oil
sensor is located (if I did, I now forget) but Al G. and John
Dibble state the temp should be taken for oil coming out of
the coolers. Heck, if this is the case, my oil may be quite a
bit cooler than I was thinking. Opinions please. It should
not be too difficult to add a sensor to where the oil enters
the engine. Don't know if the Delta will be much, but perhaps
enough....
What say Ye?
Chris