X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from fmailhost04.isp.att.net ([207.115.11.54] verified) by logan.com (CommuniGate Pro SMTP 5.4.5) with ESMTP id 5519976 for flyrotary@lancaironline.net; Wed, 02 May 2012 16:45:55 -0400 Received-SPF: none receiver=logan.com; client-ip=207.115.11.54; envelope-from=bbradburry@bellsouth.net Received: from desktop (adsl-98-85-145-153.mco.bellsouth.net[98.85.145.153]) by isp.att.net (frfwmhc04) with SMTP id <20120502204521H04009qhnte>; Wed, 2 May 2012 20:45:21 +0000 X-Originating-IP: [98.85.145.153] From: "Bill Bradburry" To: "'Rotary motors in aircraft'" References: In-Reply-To: Subject: RE: [FlyRotary] Re: It won't run no more Date: Wed, 2 May 2012 16:45:21 -0400 Message-ID: <2C5BFFE69EBD441BB02A809EFAC92B10@Desktop> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 Thread-Index: Ac0oaPej8ROP37atTD61//sjSY2HTAAOtK7Q X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6002.18463 Ernest, There is a Schrader valve in the end of the hose that has the two O-rings on it. That valve will cause the tester to pump up and stay up at the max pressure if you are testing a piston. To test the rotary, you would remove that valve and watch the gage to see where it goes as each face rolls by the plug. There is another Schrader valve just under the gage that has a valve stem cap on it. It looks like a black button in the picture. That is to release the pressure after you have pumped it up with the piston. Don't remove that valve or the tester will not work for either engine type. B2 -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Ernest Christley Sent: Wednesday, May 02, 2012 9:38 AM To: Rotary motors in aircraft Subject: [FlyRotary] Re: It won't run no more Lehanover@aol.com wrote: > Get the kind that has a hose and the Spark plug replica that seals with > an "O" ring. Easy to use in tight spaces. No tools required to install it. > > Lynn E. Hanover > > In a message dated 5/1/2012 10:44:02 P.M. Eastern Daylight Time, > echristley@att.net writes: > > I don't have a compressiion tester yet. Like this one? http://www.jegs.com/i/Sunpro/885/CP7827/10002/-1 Where is the schrader valve you were saying needs to be removed? I'm assuming the procedure is to spin the engine with the starter and eyeball the needle to see where it is maxing out? -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html