Speaking of EGT calibration. If the
EGT reads ambient air temps accurately, does that mean that it is accurate throughout
its range??? If not, how do you check the temp when it is reading 15-1600
degrees??
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of bktrub@aol.com
Sent: Wednesday, February 08, 2012
9:17 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] one more
thing
Also, I forgot to mention- in looking at
the calibration for my EGTs I have the same settings for both- Scale factor is
1.943 and the low end offset is 38. Is this the correct factory setting?