Ernest,

     Cannot  find a air temp sensor on my 93-95 Cosmo 13B.............Just a water

temp sender like link below............

 

http://www.mazdatrix.com/pictures/o-elect/93-95WaterThermoB.jpg

 

 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tuesday, January 10, 2012 12:02 PM
Subject: [FlyRotary] Re: Oil temp sensor

Ernest,

    I am headed to my hangar today.........Will check my Cosmo 13B to see if its

temp sensor is the same as the 93-95 13BREW Rx7 sensor.........I will not be

using it on my Delta...........

 

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: "echristley@nc.rr.com" <echristley@nc.rr.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tuesday, January 10, 2012 10:54 AM
Subject: [FlyRotary] Oil temp sensor

I have an oil temp sensor in the end of my remote oil-filter mount.
Staring at it last night, it is not really protruding into the oil
flow.  It sits back in a sort of sheltered alcove.  I think my oil
temp readings may be skewed to the cool side by the arrangement.

I'd like to move it to the 1/2" aluminum block that covers the filter
mount on the engine, but drilling and tapping the block for a 1/8th NPT
hole would leave very little aluminum on the top and bottom of the block to hold the
sensor.  Does anyone have a spare 93-99 Manifold Air Temp Sensor that
they wouldn't mind parting with?  They look like this:

http://atkinsrotary.com/store/product.php?productid=16989

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:  http://mail.lancaironline.net:81/lists/flyrotary/List.html