From: Steve Thomas <glasair2@me.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Fri, Apr 22, 2011 13:38:10 GMT+00:00
Subject: [FlyRotary] Re: DNA Mufflers No Longer Available

I just paid $100 Canadian ($105 US - can you believe this?).  The company still has a few left in stock.  If interested, my contact is Colleen Porter, colleen@tunedproducts.com .

Best Regards,

Steve Thomas

_______________________________________________________

On Apr 22, 2011, at 5:31 AM, Mark Steitle wrote:

Bill, 

Best I recall, the model I purchased was about $110.  It is built like a Sherman tank.  It takes a lick'n and keeps on tick'n.

Mark

On Thu, Apr 21, 2011 at 11:30 PM, wrjjrs@aol.com <wrjjrs@aol.com> wrote:

Mark, do you recall how much they were getting for them? I was considering making some in our sheet metal shop at work.
Bill Jepson

Sent via DROID on Verizon Wireless

-----Original message-----

From: Mark Steitle <msteitle@gmail.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, Apr 20, 2011 16:51:51 GMT+00:00
Subject: [FlyRotary] Re: DNA Mufflers No Longer Available

Steve,

 

You better grab the 3.5" unit while it is still available.  You can get a reducer from Burns Stainless.

 

Mark

On Wed, Apr 20, 2011 at 9:28 AM, Steve Thomas <glasair2@me.com> wrote:

Here is a response from the people who make the DNA mufflers.  Apparently they are discontinuing distribution of the muffler and it is no longer available in the USA, for all practical purposes.

Best Regards,

Steve Thomas

_______________________________________________________

Begin forwarded message:

From: "Colleen Porter" <colleen@tunedproducts.com>

Date: April 20, 2011 7:16:59 AM PDT

To: "'Steve Thomas'" <steve@stevet.net>

Subject: RE: Where to Find?

Hi Steve,

We don't offer the Full Throttle Muffler in a 2.5" inlet, the smallest is
3", but I only have 3.5" & 4" in stock.  You could use a reducer for the 3.5
to 2.5 but you would have to get that from a muffler shop.  You won't find
the mufflers in the US as we are not actively pursuing manufacturing or
distribution of these mufflers.  We are selling down the inventory that we
have, but we are not producing any mufflers at this time - the demand is
just not there.

Colleen

-----Original Message-----
From: Steve Thomas [mailto:steve@stevet.net]
Sent: Wednesday, April 20, 2011 8:11 AM
To: info@dnamufflers.com
Subject: Where to Find?

Is it possible to get a Full Throttle Muffler with a 2 1/2 inch
inlet/outlet?  If not, do you have a transition piece to move from 2 1/2
inch to 3 inch?  Also, I'm having a hard time finding much of a selection of
DNA mufflers at the locations listed on your dealer list.  I'm in the USA,
and would like to find an internet site that has a wide selection of your
products.  Thanks.


Best Regards,

Steve Thomas

____________________________________________________________________