| Al,
I'd love to have a good tangential solution. Mistral had developed one before they declared bankruptcy. But, their engineer told me that they were loosing at least 5 HP with it. So, if I am ignorant, I am happy to be corrected.
I presume that you have shared your design before? Can I find in in the archives? I am not a welder, so I have to hire any welding that needs to be done, so the cost of an Inconel device will be quite pricy, I presume.
Burns Stainless wrote back to me and wants me to send the failed muffler to them for analyses. Should be interesting.
Best Regards,
Steve Thomas
_______________________________________________________
On Apr 20, 2011, at 9:51 AM, Al Gietzen wrote: Steve wrote: 3. At 50% power, my fuel flow is 11 GPH rich and 9GPH lean. This doesn’t seem right – at 50% power my 20B will run 9-10 gph leaned. The tangential style mufflers are too power-robbing My 20B got 265 hp at 6300 rpm on the dyno with the tangential muffler and secondary resonator. With 9.0 : 1 rotors and normally aspirated that’s not all bad. But perhaps more importantly I now have 213 hour on the inconel tangential and 321 SS secondary; and they are still in good condition. And it is reasonably quiet. Al G
|