|
|
Unless he's changed, I bought a dual belt aluminum billet front
pulley that went on the front of the motor.. Cant remember if I got
it from racing beat, but its DEFINITELY not stock..
Dave
On 4/14/2011 3:03 AM, Chris Barber wrote:
Kelly, both would be great. That way I am less likely to be
lacking.
Thank you.
Chris
From: Rotary motors
in aircraft [flyrotary@lancaironline.net] on behalf of
Kelly Troyer [keltro@att.net]
Sent: Wednesday, April 13, 2011 10:54 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] A/C part needed
Chris,
Are you using the stock eccentric shaft pulley
or a undersize "Racing Beat"
aluminum pulley ?............I ask because I cannot
remember if the "RB" pulley
is drilled to bolt a stock a/c pulley to
it.............I have two different diameter
pulleys that will bolt to the stock eccentric
pulley and hub...........One is 5.75"
dia and the other is 4.75" dia.........The smaller
will nest in the larger and both
will bolt to the to the eccentric
hub/pulley...........Not sure what was driven by
them........I presume one was for the a/c and the
other the smog pump.......I
will send both unless you have a diameter
preference...........
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From:
Chris Barber <cbarber@bellairepolice.com>
To:
Rotary motors in aircraft
<flyrotary@lancaironline.net>
Sent:
Wed, April 13, 2011 3:01:49 PM
Subject:
[FlyRotary] Re: A/C part needed
Kelly,
Thanks. That would be great.
10827 Tower Bridge
Houston, Texas 77075
Let me know what I owe you, shipping etc.
Chris
Christopher
Barber, JD.
Corporal;
Patrol Division
Master
Peace Officer
Badge
330
Bellaire
Police Department
5100
Jessamine
Bellaire,
Texas 77401
713-668-0487
From:
Rotary motors in aircraft
[flyrotary@lancaironline.net] on behalf of
Kelly Troyer [keltro@att.net]
Sent: Wednesday, April 13, 2011 08:59
To: Rotary motors in aircraft
Subject: [FlyRotary] A/C part needed
Chris,
My 13B's are all 2nd generation
except for my "Cosmo"
13B............I will be at my
hangar this afternoon and will hunt up
a a/c pulley..........If successful I can
have it on
the way tomorrow.............Will need
your shipping address...........Let me
know........
Kelly Troyer
"DYKE DELTA JD2"
(Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From:
Chris Barber
<cbarber@texasattorney.net>
To:
Rotary motors in aircraft
<flyrotary@lancaironline.net>
Sent:
Wed, April 13, 2011 1:43:26 AM
Subject:
[FlyRotary] Re: A/C part needed
My second gen needs standard "V"
belts (not the serpentine). Thanks
though
Chris
I’ll try to
remember to look this
afternoon, I might still
have mine.
Jay
From: Rotary motors in
aircraft
[mailto:flyrotary@lancaironline.net]
On Behalf Of
Kelly
Troyer
Sent:
Tuesday, April 12, 2011
10:12 AM
To:
Rotary motors in
aircraft
Subject:
[FlyRotary] Re: A/C part
needed
If Bill does
not find his I am sure
there are several
lying around my hangar
also..........Just
let me know if
you need
one.............
Kelly
Troyer
"DYKE DELTA
JD2"
(Eventually)
"13B
ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil
Manifold
"TURBONETICS"_TO4E50
Turbo
From: Bill Eslick
<wgeslick@gmail.com>
To:
Rotary motors in
aircraft
<flyrotary@lancaironline.net>
Sent:
Tue, April 12, 2011
8:19:19 AM
Subject:
[FlyRotary] Re: A/C
part needed
Chris,
I am sure I have at
least one at home,
but will not be back
there
until Saturday.
Bill Eslick
Granbury, Tx
On Tuesday, April
12, 2011, Chris
Barber <cbarber@texasattorney.net>
wrote:
>
>
>
>
>
>
>
> My A/C guru
made it out to the
hangar tonight and
we brainstormed the
best install
routes. I thought
we could use
the pulleys from the
e-shaft to go to the
compressor, however,
my buddy,
Blaine, enlightened
me that there would
not be enough
> belt contact
in the positions we
have. As a result
we determined that
we need the original
A/C pulley for
the 13b (2nd gen),
that, I believe,
bolts onto the front
of the e-shaft
pulley.
>
> I have done web
searches to no
avail.
>
> Do any of y'all
have one...or a good
source for this sort
of used part. I
assume this may be
an "extra" part for
many builders and
race types. Most my
web searches wants
to show me often
replaced parts like
compressor. Not
sure what it is
actually
> called either
to do a proper
search.
>
> Oh, and we
didn't just focus on
the luxury of an
A/C, we
are diminishing the
pre-inspection
squawk list
significantly. ;-)
>
> Thanks
>
> Chris
> Houston
>
>
>
>
>
>
--
Homepage:
http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
Warning: This e-mail transmission, and any
documents, files or previous e-mails attached to it,
may contain confidential information that is legally
privileged. If you are not the intended recipient or
the person responsible for delivering it to the
intended recipient, you are hereby notified that any
disclosure, copying, distribution or use of any of
the information contained in or attached to this
transmission is STRICTLY PROHIBITED. If you have
received this transmission in error, please
immediately notify us by telephone at 713-662-8132
and destroy the original transmission and its
attachments without reading them. Thank you.
|
|