|
|
Kelly,
Thanks. That would be great.
10827 Tower Bridge
Houston, Texas 77075
Let me know what I owe you, shipping etc.
Chris
Christopher Barber, JD.
Corporal; Patrol Division
Master Peace Officer
Badge 330
Bellaire Police Department
5100 Jessamine
Bellaire, Texas 77401
713-668-0487
From: Rotary motors in aircraft [flyrotary@lancaironline.net] on behalf of Kelly Troyer [keltro@att.net]
Sent: Wednesday, April 13, 2011 08:59
To: Rotary motors in aircraft
Subject: [FlyRotary] A/C part needed
Chris,
My 13B's are all 2nd generation except for my "Cosmo" 13B............I will be at my
hangar this afternoon and will hunt up a a/c pulley..........If successful I can have it on
the way tomorrow.............Will need your shipping address...........Let me know........
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: Chris Barber <cbarber@texasattorney.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, April 13, 2011 1:43:26 AM
Subject: [FlyRotary] Re: A/C part needed
My second gen needs standard "V" belts (not the serpentine). Thanks though
Chris
From: Rotary motors in aircraft [flyrotary@lancaironline.net] on behalf of Jay [jayjacobs@comcast.net]
Sent: Tuesday, April 12, 2011 9:17 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: A/C part needed
I’ll try to remember to look this afternoon, I might still have mine.
Jay
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Kelly Troyer
Sent: Tuesday, April 12, 2011 10:12 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: A/C part needed
If Bill does not find his I am sure there are several lying around my hangar also..........Just
let me know if you need one.............
Kelly Troyer
"DYKE DELTA JD2"
(Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: Bill Eslick <wgeslick@gmail.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Tue, April 12, 2011 8:19:19 AM
Subject: [FlyRotary] Re: A/C part needed
Chris,
I am sure I have at least one at home, but will not be back there
until Saturday.
Bill Eslick
Granbury, Tx
On Tuesday, April 12, 2011, Chris Barber <cbarber@texasattorney.net> wrote:
>
>
>
>
>
>
>
> My A/C guru made it out to the hangar tonight and we brainstormed the best install routes. I thought we could use the pulleys from the e-shaft to go to the compressor, however, my buddy, Blaine, enlightened me that there would not be enough
> belt contact in the positions we have. As a result we determined that we need the original A/C pulley for the 13b (2nd gen), that, I believe, bolts onto the front of the e-shaft pulley.
>
> I have done web searches to no avail.
>
> Do any of y'all have one...or a good source for this sort of used part. I assume this may be an "extra" part for many builders and race types. Most my web searches wants to show me often replaced parts like compressor. Not sure what it is actually
> called either to do a proper search.
>
> Oh, and we didn't just focus on the luxury of an A/C, we are diminishing the pre-inspection squawk list significantly. ;-)
>
> Thanks
>
> Chris
> Houston
>
>
>
>
>
>
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
Warning: This e-mail transmission, and any documents, files or previous e-mails attached to it, may contain confidential information that is legally privileged. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify us by telephone at 713-662-8132 and destroy the original transmission and its attachments without reading them. Thank you.
|
|