|
|
----- Original Message -----
From: "John Slade" <sladerj@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, January 21, 2004 6:11 PM
Subject: [FlyRotary] Re: manifold
> what are the round holes in the rotor housings, between the intake
ports.
I think you're refering to the primary injector ports.
John Slade
If the two holes you are referring to have an large O-ring, they were part
of the original car manifold cooling system. Not needed. The manifold, when
tightened against the O-rings will seal them closed. Paul Conner
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|