X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imr-db03.mx.aol.com ([205.188.91.97] verified) by logan.com (CommuniGate Pro SMTP 5.4c2o) with ESMTP id 4891997 for flyrotary@lancaironline.net; Sat, 05 Mar 2011 10:39:27 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.188.91.97; envelope-from=Bktrub@aol.com Received: from imo-da04.mx.aol.com (imo-da04.mx.aol.com [205.188.169.202]) by imr-db03.mx.aol.com (8.14.1/8.14.1) with ESMTP id p25Fce29007627 for ; Sat, 5 Mar 2011 10:38:40 -0500 Received: from Bktrub@aol.com by imo-da04.mx.aol.com (mail_out_v42.9.) id q.ece.11619a22 (55914) for ; Sat, 5 Mar 2011 10:38:35 -0500 (EST) Received: from smtprly-mc03.mx.aol.com (smtprly-mc03.mx.aol.com [64.12.95.99]) by cia-md07.mx.aol.com (v129.9) with ESMTP id MAILCIAMD071-d3da4d7258f7be; Sat, 05 Mar 2011 10:38:35 -0500 Received: from TSTMAIL-D10 (tstmail-d10.sim.aol.com [205.188.58.143]) by smtprly-mc03.mx.aol.com (v129.9) with ESMTP id MAILSMTPRLYMC034-d3da4d7258f7be; Sat, 05 Mar 2011 10:38:31 -0500 References: To: flyrotary@lancaironline.net Subject: Re: [FlyRotary] Re: For Sale Date: Sat, 05 Mar 2011 10:38:31 -0500 X-AOL-IP: 69.84.254.253 In-Reply-To: X-MB-Message-Source: WebUI MIME-Version: 1.0 From: bktrub@aol.com X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8CDA9628417EB48_1A40_1F855_TSTMAIL-D10.sysops.aol.com" X-Mailer: AOL Webmail 33356-STANDARD Received: from 69.84.254.253 by TSTMAIL-D10.sysops.aol.com (205.188.58.143) with HTTP (WebMailUI); Sat, 05 Mar 2011 10:38:31 -0500 Message-Id: <8CDA96283571B97-1A40-E046@TSTMAIL-D10.sysops.aol.com> X-Spam-Flag:NO X-AOL-SENDER: Bktrub@aol.com ----------MB_8CDA9628417EB48_1A40_1F855_TSTMAIL-D10.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" Are you sure you don't want to just pickle the engine and store it? Two ye= ars isn't that long.Not long enough to completely abandon all your progres= s. It' took 15 1/2 years to get my plane in the air, and it's still in the= tuning phase.=20 Are you going to Osan? Better develop a taste for Kim chee. Brian Trubee -----Original Message----- From: Ed Anderson To: Rotary motors in aircraft Sent: Sat, Mar 5, 2011 5:52 am Subject: [FlyRotary] Re: For Sale Really hate to hear that, Chris =20 You would have thought with them just transferring you to NC that the Air= Force would have left you here a bit longer. Since my old 13B is still= running strong, I'm not in the market for a Renesis, but hope you can sel= l it as a package. =20 I presume you are keeping the airframe? =20 Ed From: Chris and Terria=20 Sent: Saturday, March 05, 2011 8:21 AM To: Rotary motors in aircraft=20 Subject: [FlyRotary] For Sale Gents, =20 The Air Force is sending me to Korea for at least two years. I just don= =E2=80=99t have the time anymore to put into building and installing the= engine. Therefore, regrettably, I must sell it. =20 I have a Renesis rebuild by Bruce Turrentine, EM-2, EC-2, RD-1C, Catto pr= op, wiring harness, RV-8 engine mount, James cowl, oil cooler, and water= cooler. I would like to sell it all together, but will part it out if ne= eded. =20 It all runs great, I just needed to finish figuring out the cooling. =20 I also have a bunch of extra parts: =20 Renesis Front plate Renesis mid plate 2 rotors w/ all seals 1 eccentric shaft Water pump Thermostat housing=20 Counterweight Tension bolts Oil pump Metering oil pump drive gear Oil pump drive gear Oil pump chain Balance weight (front) Front stationary gear, plate, needle bearings and thrust plate Rear stationary gear Pressure regulator Oil injector lines and bolts Complete air intake (upper, lower, throttle body) Set of coils Metering pump Primary fuel rail Set of four injectors Other oil lines Wiring harness Oil filter tree Timing gear Fuel rail spacer Secondary fuel rail Eccentric pulley H2O sensor Knock sensor =20 Anyone out there looking for an almost complete package? =20 Chris ----------MB_8CDA9628417EB48_1A40_1F855_TSTMAIL-D10.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="utf-8"
Are you sure you don't want to just pickle the engine and store it?= Two years isn't that long.Not long enough to completely abandon all your= progress. It' took 15 1/2 years to get my plane in the air, and it's stil= l in the tuning phase.
 
Are you going to Osan? Better develop a taste for Kim chee.
 
Brian Trubee


 


-----Original Message-----
From: Ed Anderson <eanderson@carolina.rr.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Sat, Mar 5, 2011 5:52 am
Subject: [FlyRotary] Re: For Sale

Really hate to hear that, Chris
 
You would have thought with them just transferring= you to NC that the Air Force would have left you here a bit longer. = Since my old 13B is still running strong, I'm not in the market for a Ren= esis, but hope you can sell it as a package.
 
I presume you are keeping the airframe?
 
Ed

Gents,
 
The Air Force is sending me to Korea for at least= two years.  I just don=E2=80=99t have the time anymore to put into= building and installing the engine.  Therefore, regrettably, I must= sell it.
 
I have a Renesis rebuild by Bruce Turrentine, EM-2,= EC-2,  RD-1C, Catto prop, wiring harness, RV-8 engine mount,  J= ames cowl, oil cooler, and water cooler.  I would like to sell it all= together, but will part it out if needed.
 
It all runs great, I just needed to finish figuring= out the cooling.
 
I also have a bunch of extra parts:
 
Renesis Front plate
Renesis mid plate
2 rotors w/ all seals
1 eccentric shaft
Water pump
Thermostat housing
Counterweight
Tension bolts
Oil pump
Metering oil pump drive gear
Oil pump drive gear
Oil pump chain
Balance weight (front)
Front stationary gear, plate, needle bearings and= thrust plate
Rear stationary gear
Pressure regulator
Oil injector lines and bolts
Complete air intake (upper, lower, throttle body)
Set of coils
Metering pump
Primary fuel rail
Set of four injectors
Other oil lines
Wiring harness
Oil filter tree
Timing gear
Fuel rail spacer
Secondary fuel rail
Eccentric pulley
H2O sensor
Knock sensor
 
Anyone out there looking for an almost complete pac= kage?
 
Chris
 ----------MB_8CDA9628417EB48_1A40_1F855_TSTMAIL-D10.sysops.aol.com--