|
|
Charlie,
I have been trying to fit the rx7 alternator and the Toyota waterpump into
my installation with frustration. I took the alternator to Advance
Autoparts and placed it next to a Denso replacement. The replacment was
about 1" smaller in diameter which may be the difference between fitting an
alternator or fitting a lycoming. Just kidding. I wish there was a way to
see if it fits without spendin $125.00 just to find out that it dose not
fit. Thanks for the info.
Joe Berki
Limo EZ
----- Original Message ----- From: "Charlie England" <ceengland@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, September 22, 2010 9:18 PM
Subject: [FlyRotary] Fwd: Alternator
Hi Joe,
If you haven't bought one yet, search ebay for 'suzuki samurai
alternator'. If you intend to use the original mount point, it should
bolt right up. It's a bit lighter than the stock model, & smaller in
diameter.
Geo Metro is similar, with, IIRC, a bit less output. The numbers in the
attachment are what's on the one in the pic, but there are quite a few
variations. Just be sure it's a Denso; some of the replacements aren't
the same quality.
BTW, pulley size might not be too big a deal on the rotary. The Lyc guys
do it because the pulley on a Lyc flywheel is about 8".
Charlie
----------------------------------------------------------------------------
----
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|