Received-SPF: none
 receiver=logan.com; client-ip=216.226.129.129; envelope-from=tmann@n200lz.com
MIME-Version: 1.0
Content-Type: multipart/alternative;
	boundary=----_SmarterMail_NextPart_4200005738306437
Date: Sat, 17 Jul 2010 22:36:38 -0400
Subject: Tie Down Hardpoints
From: "Thomas Mann" <tmann@n200lz.com>
Reply-To: tmann@n200lz.com
To: <flyrotary@lancaironline.net>
CC: 
Message-ID: <b310b4fa923c44a0a34039a69b1923c4@mail.infosaic.com>

This is a multi-part message in MIME format.

------_SmarterMail_NextPart_4200005738306437
Content-Type: text/plain;
	charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Hey Tony.=0D=0ANow I'm looking for the tie down hardpoints (either parts or=
 specs) referenced on page 25 of the 'A' kit manual.=0D=0A=0D=0AI have not =
found them in the drawings either.=0D=0A=0D=0AThey say thay are Cad plated =
steel. I can have them made but I would be guessing. =0D=0AMaybe .125  3" x=
 3.5" plate would suffice with a threaded steel bushing welded to it and th=
en plated.=0D=0AI figure the bushing threaded/tapped 1/4" x 28 could be 5/8=
" material ... maybe. ... or 3/4".=0D=0A=0D=0AAny Ideas?=0D=0A=0D=0AThanks.=
=0D=0A=0D=0AT Mann

------_SmarterMail_NextPart_4200005738306437
Content-Type: text/html;
	charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Hey Tony.<br>Now I'm looking for the tie down hardpoints (either parts or s=
pecs) referenced on page 25 of the 'A' kit manual.<br><br>I have not found =
them in the drawings either.<br><br>They say thay are Cad plated steel. I c=
an have them made but I would be guessing. <br>Maybe .125&nbsp; 3" x 3.5" p=
late would suffice with a threaded steel bushing welded to it and then plat=
ed.<br>I figure the bushing threaded/tapped 1/4" x 28 could be 5/8" materia=
l ... maybe. ... or 3/4".<br><br>Any Ideas?<br><br>Thanks.<br><br>T Mann

------_SmarterMail_NextPart_4200005738306437--