My turbo is a Turbonetics 60-1 compressor
trim, with 1.15 A/R divided tang, oil to bearings, and water cooled. See the following link.
http://www.agpturbo.com/product.php?productid=16138&cat=252&page=1 or the attached .pdf file (if it can be
transmitted).
Bob
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Kelly Troyer
Sent: Wednesday, April 21, 2010
3:52 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Rotary engine
aircraft in Dallas
area
Curious as to the make,model, Compressor Trim and A/R of
the
Turbine housing of your Turbo ??...................
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original
message from "Rogers, Bob J." <BRogers@FDIC.gov>:
--------------
I am the guy in McKinney. See http://www.eaa1246.org/projectsnplanesdisplay.asp?id=10
and http://www.eaa1246.org/videodisplay.asp?id=36
I am not an A&P.
Bob Rogers
Mustang II
N62BT
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bryan Winberry
Sent: Tuesday, April 20, 2010
12:57 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Rotary
engine aircraft in Dallas area
There’s also a guy in McKinney.
I can’t remember his name, but you could find it on the EAA website.
Bryan
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bill Eslick
Sent: Tuesday, April 20, 2010 1:54
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Rotary
engine aircraft in Dallas area
Al,
I am about 70 miles SW of DFW at Pecan Plantation (0TX1), and Jason Hutchison
also has a rotary-powered RV-6A here. Feel free to visit anytime.
Neither of us is an A&P.
Bill Eslick
On Tue, Apr 20, 2010 at 12:34 PM, Al Gietzen <ALVentures@cox.net> wrote:
Who do
we have in Dallas area installing
or flying rotary engine? Anyone with A&P Certification?
Thanks,
Al