|
|
I replied almost immediately to your first
request.
BW
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Mark Steitle
Sent: Tuesday, April 20, 2010 6:04
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Renesis
CAS Trigger Wheel Dims
Thanks guys.
Bryan,
can you refresh my memory on "previous"?
Mark
On Tue, Apr 20, 2010 at 4:41 PM, Bryan Winberry <bryanwinberry@bellsouth.net>
wrote:
I measured mine as it’s on the shelf. .079.
Mark, did you read my previous?
Bryan
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Tracy Crook
Sent: Tuesday, April 20, 2010 5:37
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re:
Renesis CAS Trigger Wheel Dims
Tried to measure
it but couldn't get the calipers behind my engine. From memory I think
it's .080" thick.
Tracy
On Tue, Apr 20,
2010 at 2:53 PM, Mark Steitle <msteitle@gmail.com> wrote:
Does anyone happen
to know the thickness of the Renesis crank trigger wheel? This is the
toothed wheel that triggers the ignition & injectors. I need to know
the exact thickness of the timing wheel. If anyone can send me this
dimension I would be very appreciative as it would save me a two hour drive.
|
|