|
Message
I use RTV as a sort of gasket. If there is no gasket, it cannot
blow out. I
put it on thicker around the outer parts of the flange and
thinner close to the
hole. Let it gel up for 10 minutes before you torque it
down. Any bit that
extrudes into the port area will vanish. Retorque after
the first heat cycle. No
leaks since 1980. You must grind the whole flange
dead flat once all of the
welding is completed.
Lynn E.
Hanover
Thanks for the extra
info Lynn. Still hard to believe this RTV thing, but I'll give it
a try. I feel like I should be paying for this course in
fabrication :-)
BTW, In your honor, I hit the Ace aircraft
supply today, in search of rubber bushings for my evap mounts.
Cheers,
Rusty (When Lynn types,
I archive)
|