Received-SPF: pass
 receiver=logan.com; client-ip=75.180.132.122; envelope-from=eanderson@carolina.rr.com
From: "Ed Anderson" <eanderson@carolina.rr.com>
Message-ID: <CF.7B.23425.F12DA9B4@cdptpa-omtalb.mail.rr.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Testing, Testing!
Date: Fri, 12 Mar 2010 18:45:42 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: AcrCOy0oYpKifFW9T3WI4GlVIHpl3wAAtc4g
In-Reply-To: <list-4164002@logan.com>

Well, Chris, you've just hit the old infamous 90% done 90% to go wall.
But, you get through it, you are the persistent type for sure {:>)

Ed

Ed Anderson

Rv-6A N494BW Rotary Powered

Matthews, NC

eanderson@carolina.rr.com

http://www.andersonee.com

http://www.dmack.net/mazda/index.html

http://www.flyrotary.com/

http://members.cox.net/rogersda/rotary/configs.htm#N494BW

http://www.rotaryaviation.com/Rotorhead%20Truth.htm

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Chris Barber
Sent: Friday, March 12, 2010 6:24 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Testing, Testing!

Still here.  I had a minor medical procedure (just cosmetic...no health
issues yet) done and will be out of the hangar for a few  more days.
However, I have been making some great progress getting things flight ready
and not just proof of concept.  I had noticed I was spending so much time
debating if there were a better way that I was slowing my progress.  I have
now moved past this limitation and am securing things up, tightening bolts,
securing and terminating wire runs.  Feels good.

I am also waiting on the welding to be done on my turbo exhaust.  A buddy is
doing the work for me so I don't want to press him, but I am anxious to get
it back and plumb up the turbo.  Ahhh, the closer I get the further the goal
seems.

All the best,

Chris
Houston, GSOT

________________________________________
From: Rotary motors in aircraft [flyrotary@lancaironline.net] on behalf of
Jeff Luckey [JLuckey@pacbell.net]
Sent: Friday, March 12, 2010 5:03 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Testing, Testing!

I haven't seen any traffic for several days.  Is anyone out there?


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Don Wallker
Sent: Tuesday, March 09, 2010 21:49
To: Rotary motors in aircraft
Subject: [FlyRotary] Exhaust flanges

Jeff,
Squaring the tubing is easy.  1.5 inch in the center and 1.75 for the
outer.  Start squishing it down in a vise, slowly, using a strong
c-clamp on the other sides and work it to the shape you need.

Don Walker

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 3267 (20080714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

 
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 3267 (20080714) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com