Received-SPF: none
 receiver=logan.com; client-ip=67.195.15.60; envelope-from=JLuckey@pacbell.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=s1024; d=pacbell.net;
  h=Received:X-Yahoo-SMTP:X-YMail-OSG:X-Yahoo-Newman-Property:From:To:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:Thread-Index:X-MimeOLE;
  b=IvUwL21cxi+qhuO2MdueURTxieuGDFNtHxVvdMt7W8w0o7tCPj8/PR12wlvLK+jHzOdp4HA4dkmRabQCl5SBgrh2PL0DfV+ppyvA1M238kZbEsfvF5BJ+D0sv4G2PnDQiiAlHPPxB6EJg6Qd78kIptmxhhvHzq5BXp0+JB5UpJk=  ;
From: "Jeff Luckey" <JLuckey@pacbell.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Any one need Renesis exhaust flanges?
Date: Tue, 9 Mar 2010 19:43:42 -0800
Message-ID: <009701cac003$e17979f0$6701a8c0@dcshq1>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-4156935@logan.com>
Thread-Index: Acq/PCmUiU6fS+1GTDibQuHlRdB+WgAxlT8Q

Don,

One day I will need flanges, but it probably won't be for a while.  But I
would like to know what they cost for future reference.

Also, what are the other components that you are using?  (such as:)

3 into 1 collector
2" mandrel-bent 321 tubing
What kind of muffler?

You may already know about www.stainlessheaders.com. They seem to have
fairly good prices.  (What do you think?)

Will you "square-out" the end of the tube to match the rectangular opening
in the flange or just keep the end circular?


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Don Wallker
Sent: Monday, March 08, 2010 19:41
To: Rotary motors in aircraft
Subject: [FlyRotary] Any one need Renesis exhaust flanges?

I'm having 2 sets of 321ss by 3/8 inch thick exhaust flanges made for my 
turbo project.  I always have 2 of most things made as I change things 
or just screw things up the first time.  I'm using the pattern from the 
steel flange that I got from Mazdatrix, but am not using the web between 
the port flanges and am making them just big enough for the 2 bolts 
above the port and the one hole below.  So a set of flanges will be one 
right and one left that will be identically and the center one that is 
smaller.  I have the same setup with my existing engine and it works 
fine.  Yes, I know there are 304ss flanges out there, but welding 321 
pipes to 321 flanges is better.  If anyone needs a set or two, let me 
know.  I don't know the prices, but these water jets guys have done work 
for me before and are fair and accurate.

Don Walker
N113BR, Renesis, 24 hours in the air

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html