|
|
Hi Doug,
I recently found a place that has just about every connector that's
available and at a reasonable price. $3.75 each. You can also get
them with a pigtail if you would rather splice than crimp.
http://www.connectorsfast.com/store/default.asp?id=108&cat=Connectors
If that raps around so that it doesn't work, use
http://tinyurl.com/y936eaj
One that isn't available is the EV1 style connector with an offset
tab. Those were used on some of the RX-7 injectors and I ran across it
on a Subaru injector also. In that case, the tab can be cut or ground
off as it doesn't really add any benefit anyway. It probably destroys
the core value when replacing them. The injectors I've seen wouldn't
allow you to plug in backwards anyway, and if you did it really
wouldn't hurt anything.
I haven't bought anything from them yet, but that's where I'm going
next time I need connectors.
Bob W.
On Tue, 19 Jan 2010 18:40:11 EST
dlomheim@aol.com wrote:
I did an archive search and didn't come up with an "hits" on this but thought someone on list in the past had found a place to buy fuel injector connectors. I am running my Bob White wiring harness (thanks Bob!) now from my EC-2 to the various end points and thought I'd like to buy some if possible vs. attempting to solder and pot the hole etc. So if any of you remember a source from your archives / personal experience I'd love to have that information so I can pursue it further.
Thanks.
Doug Lomheim; RV-9A rewiring, etc.
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
Now Rotary Powered Alpine http://www.youtube.com/watch?v=FwceNc2ydN8
Cables for your rotary installation - http://roblinstores.com/
|
|