|
|
Bryan,
Yes they check good with the feeler gauge and I can find very little wear
with a dial indicator for the wear pattern step.
Joe
----- Original Message ----- From: "Bryan Winberry" <bryanwinberry@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, November 19, 2009 9:24 PM
Subject: [FlyRotary] Re: End and intermediate housings
Joe,
Have you checked them for wear with a straight edge and feeler gauge?
BW
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of josrph berki
Sent: Thursday, November 19, 2009 9:18 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] End and intermediate housings
When rebuilding the 2nd gen do the cast iron housings need any treament or
can they be used as is? Cylinders ina piston engine are usually honed so
new rings can seat what about side seals? Thanks for any help
Joe Berki
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|