Received-SPF: none
 receiver=logan.com; client-ip=203.24.100.45; envelope-from=lendich@aanet.com.au
Message-ID: <97D5CE363A9742C9872A170877DDB198@ownerf1fc517b8>
From: "George Lendich" <lendich@aanet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-3972999@logan.com>
Subject: Re: [FlyRotary] Still quiet
Date: Thu, 12 Nov 2009 17:58:24 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="Windows-1252";
	reply-type=original
Content-Transfer-Encoding: 8bit

 Chris,
Your right - it is addictive!
George ( down under)

Hey guys, do I have to go have another baby to get some activity on the 
list?  Geez, there must be something going on.  If I have to I will take one 
for the team and go out and find some likely candidates to practice with, 
but come on....we must be doing some work on our rotaries.

I <sniff> miss you guys.

BTW, is Tracy back yet?  I have my "extra" ECU I need to send in.

All the best,

Chris

________________________________________
From: Rotary motors in aircraft [flyrotary@lancaironline.net] On Behalf Of 
Steve Brooks [cozy4pilot@gmail.com]
Sent: Tuesday, November 10, 2009 4:17 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: No start after

Steve,
Thanks for checking this on your set up. I just sent Tracy an email off
line about this. I am thinking that there must be an issue with the
controller, unless he has some other test I can do. I am out of ideas on
things to check at this point.

Steve Brooks

sboese wrote:
>
> Steve,
>
> Last night I tried to determine the effects of miswiring a properly
> functioning CAS to one of my EC2’s
>
> Reversing the two CAS signals resulted in no sparks (no coil control
> signal pulses generated and not one spark seen at any RPM).
>
> Disconnecting either or both of the CAS signals resulted in no sparks.
>
> Reversing the polarity of either one of the CAS sensors also resulted
> in no sparks.
>
> Reversing the polarity of both CAS sensors resulted in sparks that
> appeared normal in intensity and timing. This last condition may be a
> non-issue or possibly an insidious problem. Probably only Tracy would
> know which would be the case. The sensible thing would be to wire
> things according to his recommendations, of course.
>
> In any case, I could not produce the symptoms you are seeing by
> miswiring known good components as described.
>
> Again, for what it is worth…
>
> Steve Boese
>


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub: 
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage:  http://www.flyrotary.com/
Archive and UnSub: 
http://mail.lancaironline.net:81/lists/flyrotary/List.html