Received-SPF: none
 receiver=logan.com; client-ip=204.127.217.106; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-3972999@logan.com>
In-Reply-To: <list-3972999@logan.com>
Subject: RE: [FlyRotary] Still quiet
Date: Wed, 11 Nov 2009 23:30:49 -0500
Message-ID: <775E4B1C887D4AE695B9426BE56CDC79@Desktop>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Thread-Index: AcpjR8FHU07FbT9xReGpIAopC84QqgACQbOg

Chris,
You never told us if you plan to breast feed..  :>)

Bill B 

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Chris Barber
Sent: Wednesday, November 11, 2009 10:21 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Still quiet

Hey guys, do I have to go have another baby to get some activity on the
list?  Geez, there must be something going on.  If I have to I will take one
for the team and go out and find some likely candidates to practice with,
but come on....we must be doing some work on our rotaries.

I <sniff> miss you guys.

BTW, is Tracy back yet?  I have my "extra" ECU I need to send in.

All the best,

Chris

________________________________________
From: Rotary motors in aircraft [flyrotary@lancaironline.net] On Behalf Of
Steve Brooks [cozy4pilot@gmail.com]
Sent: Tuesday, November 10, 2009 4:17 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: No start after

Steve,
Thanks for checking this on your set up. I just sent Tracy an email off line
about this. I am thinking that there must be an issue with the controller,
unless he has some other test I can do. I am out of ideas on things to check
at this point.

Steve Brooks

sboese wrote:
>
> Steve,
>
> Last night I tried to determine the effects of miswiring a properly 
> functioning CAS to one of my EC2's
>
> Reversing the two CAS signals resulted in no sparks (no coil control 
> signal pulses generated and not one spark seen at any RPM).
>
> Disconnecting either or both of the CAS signals resulted in no sparks.
>
> Reversing the polarity of either one of the CAS sensors also resulted 
> in no sparks.
>
> Reversing the polarity of both CAS sensors resulted in sparks that 
> appeared normal in intensity and timing. This last condition may be a 
> non-issue or possibly an insidious problem. Probably only Tracy would 
> know which would be the case. The sensible thing would be to wire 
> things according to his recommendations, of course.
>
> In any case, I could not produce the symptoms you are seeing by 
> miswiring known good components as described.
>
> Again, for what it is worth.
>
> Steve Boese
>


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html