Okay Kelly, I’ll add you to the list … hopefully tomorrow I’ll
have them available.
The drawings are at home and we just got a new scanner/printer
combo … haven’t tried the scanner yet, so this will be a good reason to try it.
Jeff
From: Rotary motors in
aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Kelly Troyer
Sent: Monday, July 13, 2009 10:44 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Interested in cog-belt PRSUs?
I built a cog-belt redrive in the late 90's based
loosely on the Finch design
but have never put it under power..........It was for a 12A
to be installed in
a Cassutt Racer............Project was shelved in favor of
my Dyke Delta and
a 13B...........When Tracy's redrives became the "Gold
Standard" I did no
more development on my design..........I have photos on my
old computer
which I have not downloaded to my current computer or I
would post them
to the group............I would be interested in seeing the
design you have if
you do not mind...........I also would pay any cost you may
incur..........
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message
from Jeff Whaley <jwhaley@datacast.com>: --------------
Jarrett,
George, Bernie:
I
found the drawings … first, I’ll try scanning them to see what size the files
are … if not too large I’ll email them to each of you.
Jeff
Jeff,
that would be super. I insist on paying copy and mailing costs. Least I can
do.Thank you so much! Bernie
Jeff,
I
am also very interested in any PSRU design good or bad.
You
never know what small piece of information you can glean from others ideas
George
( down under)
Thanks, no hurry what-so-ever, just would like to see them is all :)
Jarrett