Received-SPF: pass
 receiver=logan.com; client-ip=65.254.253.83; envelope-from=SRS0=LWA4Bn=CV=me.com=glasair2@yourhostingaccount.com
Message-Id: <01C8F878-816A-4D9D-AE47-E387368B4E93@me.com>
From: Stephen Thomas <glasair2@me.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Content-Transfer-Encoding: 7bit
Mime-Version: 1.0 (Apple Message framework v935.3)
Subject: Sealing the Radiators
Date: Fri, 26 Jun 2009 14:15:13 -0700
Sender:  Stephen Thomas <glasair2@me.com>

I'm nearly finished with my Mistral installation and aircraft build.   
One of the tasks I have left to do is seal all the possible air  
passages between the radiators and the plenum.  What have you-all used  
to make this seal?  I know that some have used one form or another of  
RTV.  Are there any adhesive tapes that would do the job?  I think it  
would be easier to use tape of some sort rather than having to cut and  
remove RTV every annual to get the lower cowl removed (my plenum is  
integrated into the lower cowl.)  But, I don't know.

Any ideas are appreciated!

Best Regards,

Steve Thomas


_______________________________________________________