How much clearance do you need to get it to rotate past the plate?
Try gouging out a furrow with a grinder just enough for it to rotate.
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of n3773@comcast.net
Sent: Wednesday, June 24, 2009
9:58 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] psru drain
i discovered that a 90 degree AN fitting
won't screw into the drain hole after the unit has been assembled. i
don't want to take it apart[again]. a 45 screws in, but comes very close
to the starter. is there another solution i am missing? is there
such a thing as an AL
street 90? kevin