X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from QMTA05.westchester.pa.mail.comcast.net ([76.96.62.48] verified) by logan.com (CommuniGate Pro SMTP 5.2.14) with ESMTP id 3634355 for flyrotary@lancaironline.net; Wed, 06 May 2009 17:52:37 -0400 Received-SPF: pass receiver=logan.com; client-ip=76.96.62.48; envelope-from=dservice@comcast.net Received: from OMTA10.westchester.pa.mail.comcast.net ([76.96.62.28]) by QMTA05.westchester.pa.mail.comcast.net with comcast id oHbi1b0010cZkys55Ms34u; Wed, 06 May 2009 21:52:03 +0000 Received: from DuaneService ([68.56.206.224]) by OMTA10.westchester.pa.mail.comcast.net with comcast id oMs31b0064r19mk3WMs3F4; Wed, 06 May 2009 21:52:03 +0000 Message-ID: <34E99DB90D794612B1E595F7BFEFCBE4@DuaneService> From: "Duane Service" To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] remote oil filter Date: Wed, 6 May 2009 17:52:01 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0035_01C9CE73.5C082B90" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5512 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579 This is a multi-part message in MIME format. ------=_NextPart_000_0035_01C9CE73.5C082B90 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Kevin, Amsoil has long offered a remote filter system, complete with = proper hoses and fittings. You can plumb in directly or they provide an = adaapter that fits the factory mount, quite flush. Also,=20 their oil filter stands above all others, it has a new nano=3D-fiber = echnology that will filter down to uner5 microns, and not restrict oil = flow. Extended oil dreain is possible with the usee of their best oil = and=20 this filter.. Duane Service ----- Original Message -----=20 From: n3773@comcast.net=20 To: Rotary motors in aircraft=20 Sent: Wednesday, May 06, 2009 4:00 PM Subject: [FlyRotary] remote oil filter my renesis engine only came with 2 holes and 2 studs in the block for = the filter. i was going to install a remote since i doubt the stock = will fit under a rv-6a cowl. since the holes are close together it = seems i should have the threaded ports come out on opposite sides. from = there i would need flex lines with/without 90's to the remote filter = base. i think i need a port for the redrive too. is it acceptable to = mount the remote on the redrive plate? is there a better place? the = cool side of the engine seems will be busy with plug wires and cooling = ducting. is anyone selling this part or have a drawing i could use to = have one made? other than the O-ring seats, it seems the whole thing = could be done on a drill press with std bits and taps, no? are the = seats machined flat and square, or filleted the dia of the O-ring? = kevin -------------------------------------------------------------------------= ----- No virus found in this incoming message. Checked by AVG - www.avg.com=20 Version: 8.5.320 / Virus Database: 270.12.19/2099 - Release Date: = 05/05/09 13:07:00 ------=_NextPart_000_0035_01C9CE73.5C082B90 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =EF=BB=BF
Kevin,  Amsoil has  long = offered a remote=20 filter system, complete with proper hoses and fittings.  You can = plumb in=20 directly or they provide an adaapter that fits the factory mount, quite=20 flush.  Also,
their oil filter stands above all = others, it has a=20 new nano=3D-fiber echnology that will filter down to uner5 microns, and = not=20 restrict oil flow.  Extended oil dreain is possible with the usee = of their=20 best oil and
this filter..  Duane = Service
----- Original Message -----
From:=20 n3773@comcast.net
Sent: Wednesday, May 06, 2009 = 4:00=20 PM
Subject: [FlyRotary] remote oil = filter

my = renesis=20 engine only came with 2 holes and 2 studs in the block for the filter. =  i=20 was going to install a remote since i doubt the stock will fit under a = rv-6a=20 cowl.  since the holes are close together it seems i should have = the=20 threaded ports come out on opposite sides.  from there i would = need flex=20 lines with/without 90's to the remote filter base.  i think i = need a port=20 for the redrive too.   is it acceptable to mount the remote on = the=20 redrive plate?  is there a better place?  the cool side of = the=20 engine seems will be busy with plug wires and cooling ducting.   = is=20 anyone selling this part or have a drawing i could use to have one = made?=20  other than the O-ring seats, it seems the whole thing could be = done on a=20 drill press with std bits and taps, no?   are the seats machined = flat and=20 square, or filleted the dia of the O-ring?     kevin


No virus found in this incoming message.
Checked by AVG = -=20 www.avg.com
Version: 8.5.320 / Virus Database: 270.12.19/2099 - = Release=20 Date: 05/05/09 13:07:00
------=_NextPart_000_0035_01C9CE73.5C082B90--