Date: Wednesday, April 22, 2009, 12:27 PM Bobby, =C2=A0 I don=E2=80=99t have an EM3 so I don=E2=80=99t know what data it collects o= r how to access it. =C2=A0 The data on the plot was collected using an NSBASIC program developed for t= his purpose and uses the same IPAQ as used with my Anywhere Map GPS system.= =C2=A0 The physical connection between the IPAQ and the EC2 uses a ground a= nd the two serial data lines from the EC2 with circuitry to translate the 5= V logic level signals to RS232 levels.=C2=A0 The data collected by the IPAQ= is transferred to an EXCEL spreadsheet for analysis. =C2=A0 Steve Boese =C2=A0 =C2=A0 =C2=A0=C2=A0=20 =C2=A0 -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Beh= alf Of Bobby J. Hughes Sent: Wednesday, April 22, 2009 10:51 AM To: Rotary motors in aircraft Subject: [FlyRotary] Re: EC2 address range issue =C2=A0 Steve, =C2=A0 May I ask how you collected the data?=C2=A0 I have the data logger option w= ith the EM3 but no information on what it collects.=C2=A0=C2=A0 Thanks, Bob= by =C2=A0 =C2=A0 --0-1576229558-1240523915=:15274 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable

Steve,

I have an IPAQ and an EC2.

Any chance I could get a copy of your program and a connection diagram=

of how you linked the two?

I too would like to see what my EC2 is doing.

When I bought the EC2 from Tracy the EM2 did not exist and now I = don't have room in

my panel for the EM2. I use a RMI engine monitor.

But I do use the IPAQ for Anywhere map as you do, so your program= would be very useful.

Thanks,

Jim

--- On Wed, 4/22/09, sboese <sboese@uwyo.edu> wrote:

From: sboese <sboese@uwyo.edu>
Subject: [Fly= Rotary] Re: EC2 address range issue
To: "Rotary motors in aircraft" <= flyrotary@lancaironline.net>
Date: Wednesday, April 22, 2009, 12:27 P= M

Bobby,<= /DIV>
<= /DIV>
I don=E2=80=99t have = an EM3 so I don=E2=80=99t know what data it collects or how to access it.

<= /DIV>
The data on the plot = was collected using an NSBASIC program developed for this purpose and uses = the same IPAQ as used with my Anywhere Map GPS system. The physical c= onnection between the IPAQ and the EC2 uses a ground and the two serial dat= a lines from the EC2 with circuitry to translate the 5V logic level signals= to RS232 levels. The data collected by the IPAQ is transferred to an= EXCEL spreadsheet for analysis.

<= /DIV>
Steve Boese
<= /DIV>
<= /DIV>
<= /FONT>
<= /DIV>
-----Original Mes= sage-----
From: Rotary m= otors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bobby J. Hughes
Sent: Wednesday, April 22, 2009 10:51 AM<= BR>To: Rotary motors in air= craft
Subject: [FlyRotar= y] Re: EC2 address range issue

Steve,

May I ask how you collected the data? I have the data logger o= ption with the EM3 but no information on what it collects. Than= ks, Bobby

--0-1576229558-1240523915=:15274--