Received-SPF: pass
 receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com
Date: Wed, 22 Apr 2009 17:29:45 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] First Flight N343BS
Message-Id: <20090422172945.f277855c.bob@bob-white.com>
In-Reply-To: <list-3593448@logan.com>
References: <list-3593448@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Congratulations Bill,

I'm glad to hear your first flight was a success and hope your time
builds smoothly and rapidly.

Bob W.

On Wed, 22 Apr 2009 21:58:30 +0000 (UTC)
wschertz@comcast.net wrote:

>=20
>=20
> Today I did first flight in a "Rotary Powered", KIS Cruiser N343BS . Tota=
l flight time (hanger to hanger ) was 30 minutes. Three circuits around the=
 airport and land since the wind was coming up and getting gusty.=20
>=20
>=20
>=20
> Have some rigging to do, was right wing heavy.=A0 Engine ran okay, still =
not used to the sound at cruise, but that will come with time and experienc=
e.=20
>=20
>=20
>=20
> oil temp peaked at 210 into the engine during climb and water at 188.=A0 =
Air through the radiator is heated 100*F .=20
>=20
>=20
>=20
> More Later,=20
>=20
>=20
>=20
> Bill schertz=20
>=20


--=20
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/