Mailing List flyrotary@lancaironline.net Message #42696
From: Bobby J. Hughes <bhughes@qnsi.net>
Subject: Renesis First Start
Date: Sun, 4 May 2008 18:50:19 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Saturday with the help of Mark Steitle I was able to start my renesis. Had to run higher rpm's to keep to it running. Wideband O2 showed lean at lower rpm's.  Today after adjusting the fuel pressure to 42 psi (was 30 psi) I was able to idle much lower. My Advanced Flight System EFIS\ engine monitor fuel injector circuit is not putting out a tach signal so no idea on the actual rpm's. Two primer clicks and it starts right up. 
 
Bobby J Hughes
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster