Received-SPF: pass
 receiver=logan.com; client-ip=207.5.128.165; envelope-from=silvius@gwi.net
Message-ID: <004f01c8abe8$eee422b0$9faec3d8@yourlk4rlmsu41>
From: "Michael Silvius" <silvius@gwi.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-2880763@logan.com>
Subject: Re: [FlyRotary] Re: radiator orientation?
Date: Thu, 1 May 2008 19:10:28 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: 7bit

Geroge:

In the end I will likely angle them a bit but my primary concern is if it is
ok to install these radiators in the vertical orientation. I have the space
up and down to use them this way. The nose bowl I have seems to work well
with things set up that way.

Michael


----- Original Message ----- 
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, May 01, 2008 5:50 PM
Subject: [FlyRotary] Re: radiator orientation?


>
> > Anyonene see any issues of concern with instaling the radiators in the
> > vertical orientation as oposed to their normal orientation with the
inlets
> > and outlet on the top. These are evaporator cores from a JMC Jimmy-
Chevy
> > Blazer
> >
> > Michael in Maine
>
> Michael,
> The front adds significantly to the flat plate drag and anything you can
do
> to reduce that affects the total drag. Are you happy with the front width,
> could it be reduced with some angle on the rads?
> George ( down under)
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>