|
|
Ed,
Great job. Wish I'd been more alert at the forum at Tracy's. Anyway, I just
had another brain fart.
The time it takes the FAW to get from one port to another is a function of
Temp. The time you WANT it to take is a function of RPM. You would like to
have DIE at several temperatures and RPMs but since you can't control the temp,
the RPM will be a function of whatever temp you end up with that day. What if
you had two each primary and secondary injectors - one at the top of the runner
and one at the flange or in the block or wherever (where it is now). If you
could bias the fuel injected between the two injectors, the heat of vaporization
of the fuel would have a big impact on charge temp and might very well make
intake temp (and therefore Tr) controllable.
I don't know how big an engineering challenge it would be to vary the fuel
delivered to "upper" and "lower" injectors so as to control the intake temps,
but perhaps it could be done with fuel pressure. It would be arguably more
reliable to do it electronically by biasing the pulse width of the injection
event between the injectors, but any way you do it, controlling intake temp
might turn out easier to accomplish than modulating the runner length.
Some brain farts are just brain farts .... Jim S.
Ed Anderson wrote:
Ok, Folks
I have finally completed the "script" to go with the DIE presentation
given at Shady Bend. For those of you, who had the "misfortunate" to have
to sit through it, you will find that it is not exactly how the actual
presentation went (for several reasons {:>)). Since I never seem able to
exactly follow a script (even when I write one), no presentation I give is
ever quite the same twice running in any case. But, I believe I have
cleaned the flow up a bit which might make it easier to follow.
The DIE related products include:
PDF of the Slides used in the Shady Bend presentation 1.4 Meg
PDF of the Formal (sort of) Mathematical derivation of the equations 225K
PDF of a short summary of the equations Attached to this e mail 95K
Excel DIE Spreadsheet for doing your own DIE calculations. 250K
Tracy and Laura Crook indicated they would post this to their web site at
some point. As most of you realize, Laura, is the stuckee for all the web
page work on the Real World Solutions web site - and in addition to taking
care of the RWS business, answering e mails, running the Florida RV events
schedule and coordinating such, she works a full week in Atlanta and runs a
home - makes me tired just listing her work load. So, I would imagine that
getting the DIE stuff posted to the web page is somewhere down her priority
list. In other words, patience is called for.
However, for those of you interested, I have attached a very brief
summary of the DIE equation derivation. Its only two pages, with some
graphs attached and is probably not that easy to follow without the expanded
step by step derivation process shown in the full up presentation.
Hopefully, it will keep those interested in the DIE occupied until the
full-up presentation is on the RWS web site {:>).
Best Regards
Ed
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
----------------------------------------------------------------
Name: DIE Summary 2003.PDF
DIE Summary 2003.PDF Type: Acrobat (application/pdf)
Encoding: base64
----------------------------------------------------------------
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
--
Jim Sower
Crossville, TN; Chapter 5
Long-EZ N83RT, Velocity N4095T
|
|