Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.68; envelope-from=Dastaten@earthlink.net
Message-ID: <47F99260.30308@earthlink.net>
Date: Sun, 06 Apr 2008 22:17:52 -0500
From: David Staten <Dastaten@earthlink.net>
User-Agent: Thunderbird 2.0.0.12 (Windows/20080213)
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Sending unit ports
References: <list-2835100@logan.com>
In-Reply-To: <list-2835100@logan.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

I've got about 3 years of fly rotary archived on this box...

The Oil Pressure fitting is  a 1/8 British Standard Pipe Thread.

Two discussed options from a few years ago are:

http://www.pegasusautoracing.com/ProductDetails.asp?RecId=3142

http://www.autometer.com/cat_accessoriesdetail.aspx?vid=59

I dont remember where Chris and I got our fitting but we are using the 
stock oil pressure sensor port for PSRU oil feed.

Dave

ktradcliff@comcast.net wrote:
> I am very sure that this question has been asked before, probably many times.  However I am not very good with the archive search.  My question is about the coolant temperature sending unit and the oil pressure sending unit ports near the oil filter and the heater hose outlet.  Does anyone know the size and type of threads these two ports are?  If these ports are not utilized they will need to be plugged.  I am not sure but I believe they are a BSP thread?  Where would you find odd fittings to plug these ports?
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
>