Received-SPF: pass
 receiver=logan.com; client-ip=207.115.11.52; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-2834091@logan.com>
In-Reply-To: <list-2834091@logan.com>
Subject: RE: [FlyRotary] Re: Oil Filter adapter
Date: Sun, 6 Apr 2008 00:21:36 -0400
Message-ID: <AD2CC79356E84D5D8E94B7647553E845@ARPTK8NG400>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Thread-Index: AciXm8H3k/Jb2+atRja5lbLigyLKwAAARWUQ

Joe,
I have one of Dale's adapters.  It is a really nice piece of work!  Two
bolts, attach the fittings, no leaks!

Oh, the engine has an oil pressure port just below the tower.  When you
install Dale's adapter, it is easy to forget the port is there and leave it
unplugged....not a good idea.  Reminded me of pictures I have seen of
Spindletop!  :>(

Bill B 

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Dale Rogers
Sent: Sunday, April 06, 2008 12:07 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Filter adapter

Joe Berki wrote:
> Does anyone make a remote oil filter adapter for 2nd gen engines?  
> Thanks for any help
>  
> Joe Berki
> Limo EZ

I still make them.  They come with 3 "out" ports, for Redrive oil, oil
pressure, oil temp, etc.  I don't have any finished at the moment, but I
have half a dozen semi-complete "blanks".  It shouldn't take long to finish
one.  Oh, and the threads are formed, not cut, so they are smoother,
stronger (the inside equivalent of rolled threads), and less likely to get
munged.  
(The AN fitting isn't included.)

Best Regards,                    
Dale R.
COZY MkIV #497, Ch. 12        |      (___       |
          |----==(___)==----|
Ch's 4, 5, 9, 16 & 23 in progress   o/ | \o
http://www.canardzone.com/forum/showthread.php?t=1388
(Cedat Fortuna Peritis)