Bob,
  I have one from a 91 NA that you are welcome to for shipping.........I am out of town but can round it up and get it ready to ship to you this week end.........

 Email me at keltro@att.net with your address if you want it..........

 KellyTroyer "Dyke Delta"_13B ROTARY Engine "RWS"_RD1C/EC2/EM2 "Mistral"_Backplate/Oil Manifold -------------- Original message from Bob White <bob@bob-white.com>: -------------- > I'm going to need a flywheel from an 89 or up NA to match my 9.7:1 > rotors. Anyone have one available? > > Thanks, > Bob W. > > > > On Wed, 06 Feb 2008 01:01:46 +0000 > "Kelly Troyer" wrote: > > > Joe, > > A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the > counterweight > > will put the 2nd gen out of balance unless rotors and both counterweights > from the > > 3rd gen are installed also...........On another note if this engine is for an > A/C using > > Tracy's redrive you must use a 2nd gen flexplate........FWIW > > -- > > Kelly Troyer > > "Dyke Delta"_13B ROTARY Engine > > "RWS"_RD1C/EC2/EM2 > > "Mistral"_Backplate/Oil Manifold > > > > > > > > > > > > > > -------------- Original message from "Joe Berki" : > -------------- > > > > > > Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b? How > much for a flex plate and counterweight? Thanks for any help. > > > > Joe berki > > Limo EZ > > > -- > N93BD - Rotary Powered BD-4 - http://www.bob-white.com > 3.8 Hours Total Time and holding > Cables for your rotary installation - http://roblinstores.com/cables/ > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html