|
Bob,
I have one from a 91 NA that you are welcome to for shipping.........I am out
of town but can round it up and get it ready to ship to you this week end.........
KellyTroyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from Bob White <bob@bob-white.com>: --------------
> I'm going to need a flywheel from an 89 or up NA to match my 9.7:1
> rotors. Anyone have one available?
>
> Thanks,
> Bob W.
>
>
>
> On Wed, 06 Feb 2008 01:01:46 +0000
> "Kelly Troyer" wrote:
>
> > Joe,
> > A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the
> counterweight
> > will put the 2nd gen out of balance unless rotors and both counterweights
> from the
> > 3rd gen are installed also...........On another note if this engine is for an
> A/C using
> > Tracy's redrive you must use a 2nd gen flexplate........FWIW
> > --
> > Kelly Troyer
> > "Dyke Delta"_13B ROTARY Engine
> > "RW
S"_RD1C/EC2/EM2
> > "Mistral"_Backplate/Oil Manifold
> >
> >
> >
> >
> >
> >
> > -------------- Original message from "Joe Berki" :
> --------------
> >
> >
> > Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b? How
> much for a flex plate and counterweight? Thanks for any help.
> >
> > Joe berki
> > Limo EZ
>
>
> --
> N93BD - Rotary Powered BD-4 - http://www.bob-white.com
> 3.8 Hours Total Time and holding
> Cables for your rotary installation - http://roblinstores.com/cables/
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|