X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imo-m23.mx.aol.com ([64.12.137.4] verified) by logan.com (CommuniGate Pro SMTP 5.2.0) with ESMTP id 2717516 for flyrotary@lancaironline.net; Wed, 06 Feb 2008 09:05:53 -0500 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.4; envelope-from=BMears9413@aol.com Received: from BMears9413@aol.com by imo-m23.mx.aol.com (mail_out_v38_r9.3.) id q.d07.25a28cf1 (34918) for ; Wed, 6 Feb 2008 09:05:01 -0500 (EST) Received: from FWM-M01 (fwm-m01.webmail.aol.com [64.12.168.65]) by cia-da03.mx.aol.com (v121.4) with ESMTP id MAILCIADA033-886647a9be8c1a7; Wed, 06 Feb 2008 09:05:00 -0500 References: To: flyrotary@lancaironline.net Subject: Re: [FlyRotary] Re: Flex plate Date: Wed, 06 Feb 2008 09:05:00 -0500 X-AOL-IP: 65.182.71.8 In-Reply-To: X-MB-Message-Source: WebUI MIME-Version: 1.0 From: bmears9413@aol.com X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8CA36E065E4D82F_37C_6A13_FWM-M01.sysops.aol.com" X-Mailer: AOL Webmail 34032-STANDARD Received: from 65.182.71.8 by FWM-M01.sysops.aol.com (64.12.168.65) with HTTP (WebMailUI); Wed, 06 Feb 2008 09:05:00 -0500 Message-Id: <8CA36E065E4D82F-37C-34C4@FWM-M01.sysops.aol.com> X-Spam-Flag: NO ----------MB_8CA36E065E4D82F_37C_6A13_FWM-M01.sysops.aol.com Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii" Ask if they have a web page please. -----Original Message----- From: Bill Bradburry To: Rotary motors in aircraft Sent: Wed, 6 Feb 2008 8:01 am Subject: [FlyRotary] Re: Flex plate I found a wrecking yard here in Florida that claims to have 150 RX-7s in it. I haven't counted, but I suspect that may be a little on the high side. But there are a lot of them. If anyone is interested, I will get the contact info for the yard. They are located in Sanford, Florida. Bill B -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bob White Sent: Tuesday, February 05, 2008 8:43 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: Flex plate I'm going to need a flywheel from an 89 or up NA to match my 9.7:1 rotors. Anyone have one available? Thanks, Bob W. On Wed, 06 Feb 2008 01:01:46 +0000 "Kelly Troyer" wrote: > Joe, > A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the > counterweight will put the 2nd gen out of balance unless rotors and > both counterweights from the 3rd gen are installed also...........On > another note if this engine is for an A/C using Tracy's redrive you > must use a 2nd gen flexplate........FWIW > -- > Kelly Troyer > "Dyke Delta"_13B ROTARY Engine > "RWS"_RD1C/EC2/EM2 > "Mistral"_Backplate/Oil Manifold > > > > > > > -------------- Original message from "Joe Berki" > : -------------- > > > Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b? How much for a flex plate and counterweight? Thanks for any help. > > Joe berki > Limo EZ -- N93BD - Rotary Powered BD-4 - http://www.bob-white.com 3.8 Hours Total Time and holding Cables for your rotary installation - http://roblinstores.com/cables/ -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html ________________________________________________________________________ More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ----------MB_8CA36E065E4D82F_37C_6A13_FWM-M01.sysops.aol.com Content-Transfer-Encoding: 7bit Content-Type: text/html; charset="us-ascii" Ask if they have a web page please.


-----Original Message-----
From: Bill Bradburry <bbradburry@bellsouth.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, 6 Feb 2008 8:01 am
Subject: [FlyRotary] Re: Flex plate

I found a wrecking yard here in Florida that claims to have 150 RX-7s in it.
I haven't counted, but I suspect that may be a little on the high side.  But
there are a lot of them.  If anyone is interested, I will get the contact
info for the yard.  They are located in Sanford, Florida.

Bill B 

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bob White
Sent: Tuesday, February 05, 2008 8:43 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Flex plate

I'm going to need a flywheel from an 89 or up NA to match my 9.7:1 rotors.
Anyone have one available?

Thanks,
Bob W.



On Wed, 06 Feb 2008 01:01:46 +0000
"Kelly Troyer" <keltro@att.net> wrote:

> Joe,
>    A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the 
> counterweight will put the 2nd gen out of balance unless rotors and 
> both counterweights  from the 3rd gen are installed also...........On 
> another note if this engine is for an A/C using Tracy's redrive you 
> must use a 2nd gen flexplate........FWIW
> --
> Kelly Troyer
> "Dyke Delta"_13B ROTARY Engine
> "RWS"_RD1C/EC2/EM2
> "Mistral"_Backplate/Oil Manifold
> 
> 
> 
> 
> 
> 
> -------------- Original message from "Joe Berki" 
> <jskmberki@alltel.net>: --------------
> 
> 
> Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b?
How much for a flex plate and counterweight?  Thanks for any help.
> 
> Joe berki
> Limo EZ


--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
More new features than ever. Check out the new AOL Mail!
----------MB_8CA36E065E4D82F_37C_6A13_FWM-M01.sysops.aol.com--