X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from host.roblinphoto.com ([72.52.218.78] verified) by logan.com (CommuniGate Pro SMTP 5.2.0) with ESMTPS id 2716883 for flyrotary@lancaironline.net; Tue, 05 Feb 2008 20:45:16 -0500 Received-SPF: pass receiver=logan.com; client-ip=72.52.218.78; envelope-from=bob@bob-white.com Received: from c-68-35-160-229.hsd1.nm.comcast.net ([68.35.160.229]:37089 helo=quail) by host.roblinphoto.com with esmtpa (Exim 4.68) (envelope-from ) id 1JMZJD-0006kV-8s for flyrotary@lancaironline.net; Tue, 05 Feb 2008 20:42:43 -0500 Date: Tue, 5 Feb 2008 18:43:19 -0700 From: Bob White To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: Flex plate Message-Id: <20080205184319.271e9dd2.bob@bob-white.com> In-Reply-To: References: X-Mailer: Sylpheed 2.4.8 (GTK+ 2.12.0; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - host.roblinphoto.com X-AntiAbuse: Original Domain - lancaironline.net X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - bob-white.com I'm going to need a flywheel from an 89 or up NA to match my 9.7:1 rotors. Anyone have one available? Thanks, Bob W. On Wed, 06 Feb 2008 01:01:46 +0000 "Kelly Troyer" wrote: > Joe, > A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the counterweight > will put the 2nd gen out of balance unless rotors and both counterweights from the > 3rd gen are installed also...........On another note if this engine is for an A/C using > Tracy's redrive you must use a 2nd gen flexplate........FWIW > -- > Kelly Troyer > "Dyke Delta"_13B ROTARY Engine > "RWS"_RD1C/EC2/EM2 > "Mistral"_Backplate/Oil Manifold > > > > > > > -------------- Original message from "Joe Berki" : -------------- > > > Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b? How much for a flex plate and counterweight? Thanks for any help. > > Joe berki > Limo EZ -- N93BD - Rotary Powered BD-4 - http://www.bob-white.com 3.8 Hours Total Time and holding Cables for your rotary installation - http://roblinstores.com/cables/